4 × 2 in labels in ZPL

A 4 × 2 inch label (101.6 × 50.8 mm) is 812 × 406 dots at 203 dpi and 1219 × 609 dots at 300 dpi. Use ^PW812 and ^LL406 on a 203 dpi printer, and the size 4x2 in the API path.

Mis à jour le 2026-10-20 · Renders made with the OpenZPL engine

4 × 2 in at each print density

^PW and ^LL are the size in millimetres times the dots per millimetre, rounded down, because they take whole dots. The printer names round the density: a "300 dpi" printer prints 12 dots per millimetre, which is 304.8 dpi. The API sizes its image the way Labelary does: inches times a whole number of dots per inch (152, 203, 304 or 609), rounded down. That is why the image can be a dot or two smaller than ^PW and ^LL. Try other sizes with the label size calculator.

Starter template

4 × 2 in suits product, shelf and carton labels: room for a name, a price or quantity and a barcode. This template is laid out for 812 × 406 dots:

^XA
^CI28
^PW812
^LL406
^FO30,30^A0N,48,48^FDThermal label rolls^FS
^FO30,88^A0N,28,28^FD4 x 6 in, 500 labels per roll^FS
^FO30,135^GB752,2,2^FS
^FO30,160^A0N,26,26^FDSKU^FS
^FO30,192^A0N,40,40^FDTLR46500^FS
^FO540,150^A0N,90,90^FD$24.90^FS
^BY2,3,110
^FO30,250^BCN,110,Y,N,N^FDTLR46500^FS
^XZ

The price is the widest element; with 90-dot text it ends near the right edge. If you lengthen it, move its ^FO left or lower the font size so it doesn't run off the label.

Coordinates in ZPL are dots, so a layout made for one density prints at another size on a different printer. See 203 vs 300 dpi before sending the same ZPL to both.

curl https://api.openzpl.com/v1/printers/8dpmm/labels/4x2/0/ \
  --data-binary @label.zpl > label.png